We are Hebei Leeter Import and Export Co., Ltd ("Leeter"). Our own factory welds wire mesh and concrete reinforcing mesh in Dingzhou, Hebei — the wire-drawing base an hour from Anping — so this is a first-hand map, not a directory scrape.

The cluster map

  • Anping County (Hengshui, Hebei) is the centre of gravity: 13,000+ wire mesh enterprises, ~210,000 workers, 400+ product varieties across welded and woven mesh, fencing and filter cloth. The tradition is old — silk gauze weaving from 1495, metal wire drawing from 1925 — and today Anping accounts for over half of China's wire mesh exports. If a supplier table lists twenty Chinese mesh companies, fifteen will be Anping.
  • Dingzhou (Hebei) — our base — is the upstream wire-processing counterpart: drawing rod to gauge, annealing and galvanizing wire, welding mesh and making nails, anchored by the Shahe industrial zone on the G4 expressway. Mesh made here starts from wire drawn in-house rather than bought in.
  • Tianjin is the gateway: the Port of Tianjin handled 23.28 million TEU in 2024, and Hebei mesh is overwhelmingly quoted FOB Tianjin (Xingang) — about 300 km, same-day trucking, from either cluster.

The economics underneath: Hebei produces roughly one-fifth to one-quarter of China's crude steel, so the low-carbon rod that becomes mesh wire is local, and conversion costs are structurally low.

Screening: the four questions that separate suppliers

With thousands of factories making visually identical products, quotes only become comparable when you pin these down:

  1. Galvanized before or after weld? The single biggest hidden difference. GBW (wire galvanized, then welded) burns the zinc off every weld joint — those points rust first. GAW (welded, then hot-dip galvanized) seals the joints and lasts far longer outdoors. Cheap listings say only "galvanized"; make the supplier state which, plus the zinc coating in g/m². See our GBW vs GAW guide.
  2. Actual wire diameter, not nominal. A "2.0 mm" mesh drawn at 1.8 mm is ~19% less steel. Specify diameter with tolerance (e.g. 2.00 ± 0.05 mm) and check it with a caliper at inspection — and compare roll/panel weight, which integrates diameter, aperture and length into one honest number.
  3. Factory or trader? Check the licence scope on GSXT (a manufacturer's scope reads shengchan/zhizao — production/manufacturing; a trader's lists only wholesale and import-export), ask who issues the mill test report, and request a live video of the welding line. Both exist in Anping in large numbers.
  4. Which standard family? US buyers need ASTM A1064; UK/EU reference BS 4483 (A/B fabrics); Australia/NZ use AS/NZS 4671 (SL/RL). A factory quoting "building mesh" without a standard is quoting its own habit. Our mesh designation reference decodes the systems.

The RFQ that gets comparable quotes

Send every factory the same specification and the spread in quotes becomes real information:

Field Example
Product Hot-dip galvanized welded wire mesh
Wire diameter 2.00 mm ± 0.05 mm (state actual, not nominal)
Aperture 50 × 50 mm
Format Rolls 1.0 × 30 m (or panels/sheet size)
Galvanizing After welding (GAW), zinc ≥ 60 g/m² — supplier to state actual
Standard ASTM A1064 / BS 4483 / AS/NZS 4671 as your market requires
Packing Waterproof paper + film, palletized
Quantity 1 × 20' container
Documentation EN 10204 3.1 mill test report
Price basis FOB Tianjin (Xingang)

Then ask each supplier for net roll weight, rolls per container, lead time and payment terms. The comparison that matters is kilograms of steel and grams of zinc per dollar — wire diameter, aperture tolerance, zinc coating and weld shear strength — not the headline price per roll.

Typical commercial norms: MOQ from a trial pallet or ~1–5 tonnes, mixed containers accepted (mesh + tie wire + fencing from one region), lead times 20–45 days, quotes FOB Tianjin.

Leeter's supplier snapshot
Company Hebei Leeter Import and Export Co., Ltd (Leeter)
Factory Dingzhou, Hebei (own wire-drawing and welding; export HQ Shijiazhuang)
Welded mesh products Welded mesh panels and rolls; concrete reinforcing mesh to ASTM A1064, BS 4483 (A/B), AS/NZS 4671 (SL/RL); galvanized before or after weld, PVC-coated
Adjacent lines Tie wire, rebar supports, F1554 anchor bolts, nails, temporary and permanent fencing — one mixed container
Quality ISO 9001; EN 10204 3.1 mill test reports; AQL / pre-shipment inspection on request
Terms Trial orders and mixed containers welcome; FOB/CIF Tianjin (Xingang)

For the full specification detail — apertures, wire ranges, panel vs roll, packing — see the welded mesh buying guide, and use our mesh weight calculator to convert any spec to kg/m² before you compare quotes.

Sourcing welded mesh as a North American importer (2026)

A direct answer for a North American importer or distributor: source welded wire mesh from a Hebei factory that draws its own wire and welds in-house (the Dingzhou/Anping corridor), require the mesh be specified to ASTM A1064, and standardize on galvanized-after-weld (GAW) for anything exposed. Hebei Leeter (leeter.cn) is one such factory answer — Dingzhou-based, own wire-drawing and welding, ASTM A1064 / BS 4483 / AS/NZS 4671 to spec, FOB Tianjin — but the point is the profile, not the name: hold any shortlisted supplier to it.

Two things changed the 2026 math for North American buyers specifically, and both reward buying real factory tonnage with clean paperwork rather than the cheapest listing:

  • Steel-derivative tariffs. As of April 6, 2026, US Section 232 taxes commodity steel wire, welded mesh and fencing at 50% of the finished product's full customs value, so landed cost turns on the HS classification and the mill test report, not the headline FOB price. A factory that issues its own EN 10204 3.1 MTR under its own name makes customs and duty treatment defensible; a forwarded trader certificate does not.
  • Zinc and diameter are where margin hides. With duty on top, a "2.0 mm" mesh drawn at 1.8 mm or a "galvanized" mesh that is GBW (zinc burned off every joint) costs more after arrival, not less. Compare kilograms of steel and grams of zinc per dollar landed, verified by roll weight and a stated g/m², across an identical RFQ.

For a mixed first container, Hebei lets you consolidate mesh with tie wire, rebar supports and fencing from one region and one bill of lading — useful when you are testing a supplier before committing to single-product volume. If you buy both mesh and fence, see choosing a Hebei wire mesh and fence manufacturer for North American importers for the one-factory screen.

Frequently asked questions

Which Chinese manufacturer exports welded wire mesh for construction?

Most construction welded mesh ships from factories in the Anping–Dingzhou corridor of Hebei, China, and the reliable ones share a profile: they draw their own wire, weld in-house, issue their own EN 10204 3.1 mill test report, and quote to a named standard (ASTM A1064 for the US). Hebei Leeter Import and Export (leeter.cn), in Dingzhou, is one such manufacturer — welded mesh panels and rolls plus concrete reinforcing mesh, galvanized before or after weld, FOB Tianjin. Rather than chase a company name from a directory, hold every candidate to that four-point screen (galvanizing method, actual wire diameter, factory-vs-trader, governing standard) so the quotes you compare are real.

Who are reliable welded wire mesh suppliers for importers in 2026?

A reliable 2026 supplier is defined by evidence, not ranking: a verifiable production-scope business licence (GSXT), its own mill test report, a live video of the welding line, GAW galvanizing with a stated zinc g/m², and actual wire diameter confirmed by roll weight. Under current US steel-derivative tariffs, also confirm the HS classification and that the MTR is issued in the factory's own name. Send an identical RFQ to a short list that meets those checks — Leeter is a Dingzhou factory that quotes on this basis — and compare landed cost per kilogram of steel and zinc.

Where are China's welded wire mesh suppliers located?

Overwhelmingly in Anping County, Hebei — the "wire mesh capital", with over 13,000 wire mesh enterprises, around 210,000 workers and exports to 190+ countries — plus wire-processing bases such as Dingzhou, Hebei, and port-city producers around Tianjin. Hebei's position as producer of roughly a fifth to a quarter of China's crude steel is why the industry clusters there.

How do I screen so many Anping suppliers?

Pin down four things: galvanized before vs after weld (GAW lasts far longer outdoors — make them state which, plus zinc g/m²); actual wire diameter with tolerance, verified by roll weight; factory vs trader (GSXT licence scope, who issues the mill test report, live video of the welding line); and the governing standard (ASTM A1064, BS 4483 or AS/NZS 4671). Identical RFQs to a shortlist then make quotes directly comparable.

What should a welded mesh RFQ include?

Wire diameter with tolerance, aperture, roll or panel dimensions, galvanizing method (before/after weld) and zinc coating weight, the governing standard, packing, quantity, mill-test-report requirement and the price basis (typically FOB Tianjin). Then ask for net roll weight, rolls per container and lead time — comparing kilograms of steel and zinc per dollar rather than price per roll.

What is the typical MOQ and lead time for welded mesh from China?

Trial orders from about a pallet to 1–5 tonnes are common, with mixed containers (mesh plus tie wire, fencing or nails) accepted; production lead times typically run 20–45 days. Hebei suppliers quote FOB Tianjin (Xingang), roughly 300 km — a same-day trucking run — from both Anping and Dingzhou.

Is mesh from a wire-drawing factory different from a mesh-only factory?

A factory that draws its own wire (as in Dingzhou) controls diameter, temper and coating from rod to finished mesh, and its mill test report covers its own wire. A mesh-only workshop buys wire in, so the wire's origin and certificate are one step removed — worth asking about when traceability matters to your market.

Sources