Actual product referenceThreaded Rod
All-thread rod 1/4"–1-1/4" in zinc, HDG or stainless
Threaded rod (all-thread) is continuously threaded bar used with nuts and couplers for hangers, anchoring and general fixing. Leeter supplies threaded rod from 1/4" to 1-1/4" diameter in lengths from 1 ft to 12 ft, zinc-plated, hot-dip galvanized or stainless, alongside our anchor bolt range.
Specification locked
Process controlled
Dimension verified
Packing documented
Technical specifications
Final values confirmed on approved order| Specification item | Available range | Order control |
|---|---|---|
| Diameter | 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4" | Confirmed on sample, drawing or order sheet |
| Length | 1 ft, 1.5 ft, 2 ft, 3 ft, 6 ft, 10 ft, 12 ft | Confirmed on sample, drawing or order sheet |
| Finish | Zinc plated, hot-dip galvanized, stainless steel | Confirmed on sample, drawing or order sheet |
| Thread | Full-length continuous thread (UNC standard; metric on request) | Confirmed on sample, drawing or order sheet |
| Accessories | Matching hex nuts, couplers and washers available | Confirmed on sample, drawing or order sheet |
Get pricing, packing and lead time.
Trial orders welcome
15–35 days from PO
FOB and CIF planning
Packing built around handling
Packing reference
Rods bundled and strapped by diameter/length, cartoned or crated with nuts and couplers bagged; palletized for export.
- ✓ Unit and outer pack confirmed
- ✓ Shipping marks checked
- ✓ Loading plan and photos available
Quality documents
Applications
- →Mechanical, electrical and plumbing hanger rods
- →Through-bolting and equipment anchoring
- →Formwork ties and general construction fixing
Explore applications →Buyer FAQ
What lengths and diameters do you stock?
Ten diameters from 1/4" to 1-1/4" across seven standard lengths from 1 ft to 12 ft. Non-standard lengths are cut and chamfered to order at container quantities.
Do galvanized rods need special nuts?
Yes — hot-dip galvanized threads carry a zinc layer, so we supply nuts tapped oversize to run freely over the coating, the same practice as our HDG anchor bolts.
Need a matched answer?
Send the drawing, destination and expected quantity to the same team that prepares your quotation.
Talk to our buyer desk
Ready to source Threaded Rod?
Turn your requirement into a quote.
Pricing, packing and lead time tied to the confirmed specification.