Actual product referenceGalvanized Wire (GI Wire)
Electro and hot-dip galvanized wire coils, 0.5–6.0mm
Galvanized wire is zinc-coated low-carbon steel wire supplied in coils for binding, fencing, mesh weaving and general construction. Leeter produces electro-galvanized and hot-dip galvanized wire from 0.5mm to 6.0mm (25–4 BWG) in coil weights from 1kg small coils to 1,000kg carriers.
Specification locked
Process controlled
Dimension verified
Packing documented
Technical specifications
Final values confirmed on approved order| Specification item | Available range | Order control |
|---|---|---|
| Material | SAE 1006/1008, Q195/Q235 (SAE 1050/1065 on request) | Confirmed on sample, drawing or order sheet |
| Wire diameter | 0.50–6.00mm (25–4 BWG) | Confirmed on sample, drawing or order sheet |
| Zinc coating (EG) | 10–40 g/m² | Confirmed on sample, drawing or order sheet |
| Zinc coating (HDG) | Commercial grade >50 g/m²; heavy coating >200 g/m² | Confirmed on sample, drawing or order sheet |
| Tensile strength | 30–55 kgf/mm² (≈300–540 MPa) | Confirmed on sample, drawing or order sheet |
| Coil weight | 1–1,000kg — small coils to carrier coils | Confirmed on sample, drawing or order sheet |
Get pricing, packing and lead time.
Trial orders welcome
15–35 days from PO
FOB and CIF planning
Packing built around handling
Packing reference
Coils wrapped in plastic film inside and woven/hessian cloth outside; palletized or floor-loaded. Custom coil weights and labels.
- ✓ Unit and outer pack confirmed
- ✓ Shipping marks checked
- ✓ Loading plan and photos available
Quality documents
Applications
- →Binding and construction tie applications
- →Raw material for woven and welded mesh, fencing
- →Handicraft, baling and packaging wire
Explore applications →Related buyer guides
Electro vs Hot-Dip Galvanized Wire: Zinc Coating Weights Explained
Electro carries 10-40 g/m2 zinc, hot-dip 50-200+ g/m2. What that means for service life, cost and your spec.
7 min read →Wire MeshChicken Wire Sizes: Mesh Openings, Gauge and Which to Buy
Hex netting openings run 1/2 in (13mm) to 2 in (50mm). How opening, gauge and finish decide the right chicken wire.
7 min read →Wire & CoatingsHigh Tensile vs Mild Steel Wire: Strength Grades for Fencing and Baling
Mild wire runs 300-540 MPa; high carbon wire 1300-2200 MPa. How steel grade decides fence, baling and spring use.
7 min read →Wire MeshSquare Woven Wire Mesh: Mesh Counts and Wire Diameters Explained
Mesh count is wires per inch: 2x2 to 60x60. How count and wire diameter set the opening, and which mesh to specify.
7 min read →Buyer FAQ
Electro-galvanized or hot-dip galvanized wire — which should I buy?
Electro-galvanized (10–40 g/m² zinc) is bright, smooth and economical for indoor binding and short-exposure use. Hot-dip galvanized carries far more zinc — commercial grade above 50 g/m² and heavy coating above 200 g/m² — for fencing and outdoor service measured in decades.
What coil sizes can you supply?
Anything from 1kg rewound small coils for retail racks up to 1,000kg carrier coils for mesh factories, with inner diameter and strapping to your specification.
Need a matched answer?
Send the drawing, destination and expected quantity to the same team that prepares your quotation.
Talk to our buyer desk
Ready to source Galvanized Wire (GI Wire)?
Turn your requirement into a quote.
Pricing, packing and lead time tied to the confirmed specification.